Rechargeable Sensor Battery Pack

BP-100R

Category:

The BP-100R Rechargeable Battery Pack is a versatile power solution designed to keep your sensors running smoothly and reliably. It serves two key functions: it can significantly extend the battery life of your sensors, reducing downtime and maintenance, or it can act as a replaceable battery pack for devices where traditional batteries would otherwise need frequent changes.

By allowing quick removal and replacement of the entire pack, the BP-100R makes sensor maintenance simpler and faster, eliminating the hassle of individually swapping batteries. With this rechargeable solution, you can ensure continuous operation of your sensors while dramatically lowering battery replacement costs and effort.

Operational Benefits

Longer operation

Extends sensor battery life for fewer interruptions.

Quick replacement

Swap the entire pack in seconds – no tools, no hassle.

Lower costs

Rechargeable design reduces battery replacement costs.

Reliable power

Built-in protections ensure safe, reliable performance.

Fast charging

Supports USB-C fast charging at 15W for power replenishment.


X

Technical Specifications

Power Supply
Operating Voltage
4.2VDC to 2.6VDC
Maximum Capacity
6800mAh
Maximum Discharge Current
5.0A
Maximum Charge Current
3.0A
Self Discharge Rate
1.0% per month
Operating Specifications
Operating Temperature
-10°C to 60°C (discharging)
0°C to 45°C (charging)
Storage Temperature
-20°C to 60°C (1 month)
-20°C to 45°C (3 months)
-20°C to 25°C (12 months)
Permissible Humidity
20% to 85% (operation and storage)
Ingress Protection
IP30 (unmated)
IP55 (mated with sensor)
Pollution Degree
2
Altitude
2000 m
Physical Characteristics
Housing Material
Flame Retardant Polycarbonate/ABS
Physical Dimensions
Height: 105mm / 4.1inch
Width: 69mm / 2.7inch
Depth: 30.8mm / 1.2inch
Weight
205g
USB-C
Specification
USB Type C version 1.3
Port Role
Dual Role Port with Try.SNK
Source (Output) Power
15W (5V 3A) maximum
Sink (Input) Power
15W (5V 3A) maximum
Typical Charge Time
200 minutes with 15W adapter
Protection
Primary Under-Voltage Protection
2.6VDC for 125ms
Primary Over-Voltage Protection
4.25VDC for 1.25s
Secondary Over-Voltage Protection
4.35VDC for 6.5s, permanent fault
Primary Discharge Over-Current Protection
6.0A for 16ms
Primary Charge Over-Current Protection
3.6A for 8ms
Short Circuit Protection (Both Directions)
20.0A for 250μs
Secondary Over-Current Protection (Both Directions)
15.0A slow blow fuse, permanent fault
Over-Temperature Protection (Charge)
45°C to 50°C reduced power, >50°C cut-off
Over-Temperature Protection (Discharge)
>60°C cut-off
Under-Temperature Protection (Charge)
10°C to 0°C reduced power, <0°C cut-off
User Interface
Status LED
1 status LED (green, red)
Product Certifications
Transportation
UN/DOT 38.3

Our Partners